Section 1. Identification of the substance or the mixture and of the supplier
1.1 Product identifier
Product Name: Air Freshener Aerosol 750ml/270ml/75ml
Product No: POWERSOLVE – Fresh Linen – 797892
1.2 Relevant identified uses of the substances of mixture and uses advised against product uses
Identified Uses: Air Freshener
1.3 Details of the supplier of the data sheet
Company name: Powersolve (UK) Ltd
Company address: 3 Ash Ride, Crews Hill, Enfield, Middx EN2 9DF
1.4 Emergency telephone number: 020 8366 6683
Section 2. Hazards Identification
2.1 Classification of the substance or mixture
Classification (EC 1272/2008)
Extremely flammable Aerosol H222
2.2 Label elements
Label in accordance with (EC 1272/2008)
Signal Word: Extremely Flammable
Hazard Statements: H222 Extremely Flammable Aerosol
Precautionary Statements:
P102 Keep out of reach of children
P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking
P251 Pressurised container. Do not pierce or burn even after use
P501 Dispose of contents/container in accordance with Local Regulations
Supplementary Precautionary Statements:
P273 Avoid release into the environment
P305+351+338 IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do. Continue
P370+378 In case of fire: Use carbon dioxide, dry chemical, foam for extinction.
P410+412 Protect from sunlight. Do not expose to temperatures exceeding
2.3 Other hazards:
Powersolve (UK) Ltd ISSUE H/3 JULY 2014
2 | P a g e
Sections 3. Composition / information on ingredients
3.2 Mixtures
Name CAS EC % Classification for (CLP)
Petroleum Gases Liquified 75-09-2 270-704-2 70-80% Flam Gas 1_H220
Ethyl alcohol 64-17-5 200-578-6 <11.8% FL 2-EDI 2;H225-
(L) 1-,2,3,4,5,6,7,8-
naphthalenyl) ethanone
54464-57-2 259-174-3 <0.21% Xi-N; R 38-43-51/53
16409-44-2 240-458-0 <0.01% N; R 51/53
28219-61-6 248-908-8 <0.03% Xi-N; R 36/38-50/53
127-51-5 204-846-3 <0.03% Xi-N; R 43-51/53
32210-23-4 250-954-9 <0.18% N; R 51/53
1506-02-1 216-133-4 <0.07% Xn-N; R 22-50/53
6-octen-1-o1,3,7-dimethyl 106-22-9 203-375-0 <0.04% Xi-N; R 38-43-51/53
7-octen-2-o1, 2,6 dimethyl 18479-58-8 242-362-4 <0.50% Xi; R 38
AMYL SALICYLATE 2050-08-0 218-080-2 <0.03% N; R 51/53
(L) d-para-Mentha-1,8 –
5989-27-5 227-813-5 <0.16% Xi-N; R 10-38-43-50/53-65
HEXAMETHYLINDAOPYRAN 1222-05-5 214-946-9 <0.13% N; R 50/53
Linalyl Acetate 115-95-7 204-116-4 <0.16% Xi; R 38
The full text for Hazard and Precautionary statements are listed in Section 16.
Section 4. First-aid measures
4.1 description of first aid measures
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
4.2 Most important symptoms and effect, both acute and delayed.
Causes eye irritation.
4.3 Indication of any immediate medical attention and special treatment needed.
None expected, see section 4.1 for further information.
Section 5: Firefighting measures
5.1 Extinguishing media
Suitable media: Carbon dioxide, Dry chemical, Foam.
Powersolve (UK) Ltd ISSUE H/3 JULY 2014
3 | P a g e
5.2 Special hazards arising from the substance or mixture.
In case of fire, may be liberated: carbon monoxide, unidentified organic compounds.
5.3 advice for fire fighters:
In case of insufficient ventilation, wear suitable respiratory equipment.
Section 6. Accidental release measures
6.1 personal precautions, protective equipment and emergency procedures:
Avoid inhalation. Avoid contact with skin and eyes. See protective measures under section 7 and 8.
6.2 Environmental precautions:
Keep away from drains, surface and ground water, and soil.
6.3 Methods and material for containment and cleaning up:
Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours. Contain spillage
immediately by use of sand or inert powder. Dispose of according to local regulations.
6.4 reference to other sections:
Also refer to sections 8 and 13.
Section 7. Handling and storage
7.1 Precautions for safe handling:
Keep away from heat, sparks, open flames and hot surfaces. – No smoking.
7.2 Conditions for safe storage, including any incompatibilities.
Protect from sunlight. Do not expose to temperatures exceeding 50ᴼC/122ᴼF
7.3 Specific end use(s):
Use in accordance with good manufacturing and industrial hygiene practises.
Section 8. Exposure controls/personal protection
8.1 Control Parameters
Workplace exposure limits:
Ingredient CAS EC STD TWA – 8 Hrs STEL- 15 Min Reference
WEL 100ppm (Sk)
300ppm (Sk)
UK EH40 Oct
WEL 1000 ppm(Sk) 1920 ppm (Sk) UK EH40 Oct
8.2 Exposure Controls
Eye/Skin Protection
Respiratory protection
Powersolve (UK) Ltd ISSUE H/3 JULY 2014
4 | P a g e
Section 9. Physical and chemical properties
9.1 Information on basic physical and chemical properties
Appearance: Aerosol
Odour As per fragrance
Initial boiling point/range: -40°C – -2°C
Flash point: -60°C
Vapour pressure: Aerosol pressurised to 70 psi
Relative density: 0.598
Solubility (ies): Soluble in alcohol, hydrocarbon solvents. Partially soluble in water.
9.2 Other information
None available
Section 10.Stability and reactivity
10.1 Reactivity:
Presents no significant reactivity hazard, by itself or in contact with water.
10.2 Chemical stability
Good stability under normal storage conditions.
10.3 Possibility of hazardous reactions:
Not expected under normal conditions of use.
10.4 Conditions to avoid:
Avoid extreme heat
10.5 Incompatible materials:
Avoid contact with strong acids, alkalis or oxidising agents.
10.6 Hazardous decomposition products:
Not expected
Section 11. Toxicological information
11.1 Information on toxicological effects
This mixture has not been tested as a whole for health effects. The health effects have been calculated using the
conventional method outlines in article 6(1)(a) of directive 1999.45.EC, in accordance with regulation (EC) No
1907/2206 (REACH). In addition, toxicity information for the mixture, if available, is provided below in accordance
with methods given in regulation (EC) No 1272/2008.
Assumed toxicity value (LD50 or ATE) for acute oral toxicity: Not applicable.
Assumed toxicity value (LD50 or ATE) for acute dermal toxicity: Not applicable.
Assumed toxicity value (LD50 or ATE) for acute inhalation toxicity: Not available.
Inhalation route: Not available.
Powersolve (UK) Ltd ISSUE H/3 JULY 2014
5 | P a g e
Information about hazardous ingredients in the mixture
Not applicable.
Refer to sections 2 and 3 additional information.
Section 12. Ecological information
12.1 Toxicity: Not available
12.2 Persistence and degradability: Not available.
12.3 Boiaccumalative potential: Not available.
12.4 Mobility in soil: Not available.
12.5 Results pf PBT and vPvB assessment:
This substance does not meet the PBT/vPvB criteria of REACH, annex XIII.
12.6 Other adverse effects: Not available.
Section 13. Disposal considerations
13.1 Waste treatment methods:
Dispose of in accordance with local regulations. Avoid disposing into drainage systems and into the environment.
Empty containers should be taken to an approved waste handling site for recycling or disposal.
Section 14. Transport information
14.1 UN Number
UN No (ADR/RID/ADN) 1950
UN No (IMDG) 1950
UN NO (ICAO) 1950
14.2 UN Proper Shipping Name
14.3 Transport Hazard Class
ADR/RID/AND Class 2.1
ADR/RID/AND Class Class 2: Gases
ADR Label No 2.1 &6.1
IMDG Class 2.1
ICAO Class/Division 2.1
ICAO Subsidiary Risk 6.1
Air Class 2.1
UK Road Class 2.1
Transport Labels L.Q.
Powersolve (UK) Ltd ISSUE H/3 JULY 2014
6 | P a g e
14.4 Packing Group
Not Applicable
14.5 Environmental Hazards
Not environmentally hazardous for transport
14.6 Special Precautions for user
None additional
14.6 Transport in bulk according to Annex II of MARPOL73/78 and the IBC code
Not applicable
Section 15. Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture:
Statutory instruments
The chemicals (Hazard information and packaging for supply) regulations 2009 (S.I 2009 No. 716). Control of
substances hazardous to health.
Approved code of practice.
Classification and labelling of substances and preparations dangerous for supply. Safety data sheets for substances
and preparations.
Guidance notes
Workplace exposure limits EH40. Introduction to Local exhaust ventilation HS(G)37. CHIP for everyone HSG(108).
EU Legislation
Dangerous substance directive 67/548/EEC. Dangerous preparations directive 1999/45/EC. Regulation (EC) No
1907/2006 of the European parliament and of the council of 18 December 2006 concerning the registration,
evaluation, authorisation and restriction of chemicals (REACH), establishing a European Chemicals agency,
amending directive 1999/45/EC and repealing council regulation (EEC) No 793/93 and commission regulation (EC)
No 1488/94 as well as council directive 76/769/EEC and commission directives 91/155/EEC, 93/67/EEC, 93/105/Ec
and 2000/21/EC, including amendments.
15.2 Chemicals safety assessment
A chemical safety assessment has not been carried out for this product.
Section 16. Other information
General Information:
This product should be used as directed. For further information consult the product data sheet or contact
Technical services.
Information sources:
This Safety Data Sheet was compiled using current safety information supplied by the distributor of raw materials.
Powersolve (UK) Ltd ISSUE H/3 JULY 2014
7 | P a g e
Classification under regulation (EC) No 1272/2008
Class and category of Flammable liquid, hazard category 1
Signal word: Extremely Flammable
Hazard statements: H222, extremely flammable aerosol
Precautionary Statements:
P201 Keep out of reach of children
P210, Keep away from heat, sparks, open flames and hot surfaces. – No smoking.
P251 Pressurised container. Do not pierce or burn, even after use.
P273 Avoid release into the environment.
P305/351/338, IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present, and easy to do. Continue rinsing.
P370/378, In case of fire: Use carbon dioxide, dry chemical, foam for extinction.
P501, dispose of contents/container to approved disposal site, in accordance with local
P410+412 Protect from sunlight. Do not expose to temperatures exceeding
This advice is given by Powersolve (UK) Ltd who accepts no legal liability for it. The information herein is based on
the present state of our knowledge, and is intended to describe our products from the point of view of safety
requirements. It should not, therefore, be construed as guaranteeing specific properties.